EVALUATION OF THE INDUSTRIAL WORK PRACTICES PROGRAM TO IMPROVE THE QUALITY OF EDUCATION AND CAREER READINESS OF STUDENTS

Authors

  • Ibnu Muthi Manajemen Pendidikan Islam, Universitas Islam 45 Bekasi, Jawa Barat, Indonesia

DOI:

https://doi.org/10.56667/dejournal.v5i1.1312

Keywords:

Program Evaluation, Field Industrial practice, CIPP

Abstract

The objective of this study is to assess the effectiveness of industrial work practice (prakerin) programs. This study employs a descriptive qualitative technique. The evaluation model employed is the CIPP (Context, Input, Process, Product) evaluation model. Data was gathered through the methods of observation, interviews, and documentation, and subsequently analyzed using the data reduction technique developed by Miles and Huberman. The results of the research show that: (1) The context for implementing internships at Tridaya Bekasi Vocational School is appropriate, in planning, compiling and synchronizing competencies it is necessary to involve DU/DI elements, and the development of internship collaboration through an MoU has not been well realized; (2) the input for implementing internships is appropriate, but participants still need to be prepared in terms of competency, where the obstacles faced by students are more about competency mastery and lack of work readiness, therefore maximizing the time and training materials is very necessary; (3) the process of implementing internships is appropriate, but the supervisor's role and responsibilities are less than optimal, causing communication about student competency development to be poorly monitored; (4) the product for implementing the internship is appropriate, this is shown by the changes that occur in students in terms of attitudes, responsibilities and increased competence.

Downloads

Download data is not yet available.
Abstract viewed = 220 times

References

Ahkyat, F., Munadi, S. M., Nuchron, & Romantoro, D. (2019). The Effect of Industrial Work Practices on Students ’Readiness at the High School of Vocational Partners PT. Astra Daihatsu Motor. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9(2), 1383–1387.

Asmarayani, E., Rusmono, & Rahmayanti, H. (2020). Evaluasi Program Pelaksanaan Praktek Kerja Lapangan ( Pkl ) Program Keahlian Teknik Furnitur Pada SMK Negeri Di DKI. Jurnal Pendidikan Teknik Dan Vokasional, 3(2).

Asegaf, A. R. M. H. N., Rosyadi, M. D., & Ramadhani, B. (2022). Implementation of The Smart Methods (Simple Multi-Attribute Rating Technique) for Location Selection of Industrial Work Practice and Monitoring In Vocational School Students. Jurnal Teknologi Informasi Universitas Lambung Mangkurat (JTIULM), 7(2). https://doi.org/10.20527/jtiulm.v7i2.140

Cukurova, M., Luckin, R., Millán, E., Mavrikis, M., & Spikol, D. (2017). Diagnosing collaboration in practice-based learning: Equality and intra-individual variability of physical interactivity. Lecture Notes in Computer Science (Including Subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10474 LNCS. https://doi.org/10.1007/978-3-319-66610-5_3

Firdaus, H., & Anriani, N. (2022). Evaluasi Program Praktek Kerja Industri Pada Sekolah Menengah Kejuruan Menggunakan Model CIPP. Jurnal Ilmiah Profesi Pendidikan, 7(4). https://doi.org/10.29303/jipp.v7i4.1011

Fitriyanto, M. N., & Pardjono, P. (2019). Factors affecting the employability skills of vocational students majoring mechanical engineering. Jurnal Pendidikan Vokasi, 9(2). https://doi.org/10.21831/jpv.v9i2.24420

Hughes, H. P. N., Mouratidou, M., & Donald, W. E. (2023). Exploring the impact of an industrial placement year on students’ competency development: a three-cohort, longitudinal study. Higher Education, Skills and Work-Based Learning, 13(6). https://doi.org/10.1108/HESWBL-02-2023-0044

Intan, T., Fatullah, R., & Gunawan, R. (2022). Perancangan Sistem Informasi Praktek Kerja Industri (Prakerin) Pada SMK Negeri 1 Kota Serang. Jurnal Ilmiah Sains Dan Teknologi, 6(2). https://doi.org/10.47080/saintek.v6i2.2143

Khalib, A., Saiful Bahry, F. D., Ismail, S. A., & Jalil, A. (2022). Industrial Internship Student’s Expectations and Feedback towards Student Professional Skills Development. Environment-Behaviour Proceedings Journal, 7(SI10). https://doi.org/10.21834/ebpj.v7isi10.4113

Larosa, E., Gani, I. P., & Mbakwa, P. N. (2022). The Effect of Industrial Practice Experience on Student’s Work Readiness of Machinery Engineering Vocational School. IJECA (International Journal of Education and Curriculum Application), 5(2). https://doi.org/10.31764/ijeca.v5i2.10135

Lestari, S., & Mahbubah, H. (2019). Impact of Industrial Work Practices on Student Readiness. https://doi.org/10.2991/icebef-18.2019.124

Nesbitt, H., Barry, D., Lawson, K., & Diaz, J. (2022). Best practices for mentoring: An exploratory study of cooperating teacher and student teacher perspectives. Advancements in Agricultural Development, 3(4). https://doi.org/10.37433/aad.v3i4.261

Nur, M. (2022). Analisis Implementasi Praktek Kerja Industri (Prakerin) Pada Program Keahlian Teknik Otomotif SMK Negeri 1 Bontang Di Kota Bontang. Jurnal Cakrawala Ilmiah, 1(7).

Oloruntoba, K., Oloye, R. A., & Adu, O. A. (2022). Effect of Practical Mentoring on Students’ Academic Development: A Case Study of Students’ Industrial Work Experience Scheme in Nigeria. International Journal of Geography and Regional Planning Research, 7(2). https://doi.org/10.37745/ijgrpr.15/vol7n23439

Prosser, C. A. Q. T. H. (1950). Vocational Education in a Democracy. Revised Edition. . Chicago: American Technical Society.

Rahmatullah, N. G. G. N. L. S. R. Yudhaningrum. L. E. A. T. (2021). Pedoman Paktik Kerja Lapangan Peserta Didik SMK/MAK Di Dalam Negeri. Jakarta: Direktorat Jenral Pendidikan Vokasi.

Rohaeni, E., Trisnamansyah, S., Wasliman, I., & Sauri, S. (2021). Implementation of Teaching Factory in Improving the Competence of Vocational High School Students (SMK). Journal of Social Science, 2(5). https://doi.org/10.46799/jss.v2i5.220

Rohman, S., Samsudi, & Sutopo, Y. (2020). Need Analysis Development Instruments Evaluation of Vocational Industrial Work Practices Based on Competence Fitness. https://doi.org/10.2991/assehr.k.200620.123

Servin, C., Kosheleva, O., Shahbazova, S. N., & Kreinovich, V. (2023). How to Gauge Students’ Ability to Collaborate? In Studies in Fuzziness and Soft Computing (Vol. 423). https://doi.org/10.1007/978-3-031-23476-7_7

Sharma, M., Sumaiya, B., Awasthi, K. K., & Mehrotra, R. (2022). A Framework for Learning Combined Problem Solving Skills. World Journal of English Language, 12(3). https://doi.org/10.5430/wjel.v12n3p10

Sifa, N. S., Sudjani, S., & Rahayu, S. (2022). The Influence of Industrial Work Practices on Employability Skills of Vocational High School. Jurnal Penelitian Pendidikan, 22(3). https://doi.org/10.17509/jpp.v22i3.51029

Stufflebeam, D. L., & Coryn, C. L. (2014). Research Methods for the Social Sciences - Evaluation Theory, Models, and Applications. Jossey-Bass.

Takei, H., Anthony, P., Fountain, E., & Williams, L. (2022). Empirical Development of the Best Practices of Coaching and Mentoring for High Performance of Competency-based Education. International Research in Education, 10(1). https://doi.org/10.5296/ire.v10i1.19393

Urinov, U., & Adizova, S. (2021). Pedagogical conditions for the development of students in industrial practice. E3S Web of Conferences, 284. https://doi.org/10.1051/e3sconf/202128409017

Wulansari, S. (2021). Management of industrial work practices in improving student competence and satisfaction of the industrial as a partner vocational school. JPGI (Jurnal Penelitian Guru Indonesia), 6(2). https://doi.org/10.29210/021088jpgi0005

Yuningsih, S. (2020). Evaluasi Program Praktek Kerja Industri (Prakerin) di SMK Negeri 3 Gorontalo. Gorontalo Management Research, 3(1). https://doi.org/10.32662/gomares.v3i1.1008

Zi, F., Hakiki, M., Putra, Y. I., & Ridoh, A. (2020). Evaluasi Pelaksanaan Program Praktek Kerja Industri Siswa Kelas XI di SMK Negeri 3 Payakumbuh Tahun Ajaran 2017/2018. Jurnal Inovasi Pendidikan Dan Teknologi Informasi (JIPTI), 1(1). https://doi.org/10.52060/pti.v1i1.300

Published

2024-06-13

How to Cite

Muthi, I. (2024). EVALUATION OF THE INDUSTRIAL WORK PRACTICES PROGRAM TO IMPROVE THE QUALITY OF EDUCATION AND CAREER READINESS OF STUDENTS. Dharmas Education Journal (DE_Journal), 5(1), 294–303. https://doi.org/10.56667/dejournal.v5i1.1312

Issue

Section

Articles